Manufacturing Process Technology I. Instructor: Prof. Shantanu Bhattacharya, Department of Mechanical Engineering, IIT Kanpur.
FREE
This course includes
Hours of videos
1333 years, 2 months
Units & Quizzes
48
Unlimited Lifetime access
Access on mobile app
Certificate of Completion
This is an introductory level course in Manufacturing Process Technology. At the heart of any manufacturing system is a set of processes which change the size, shape and form of raw materials into the desirable thus giving an industrial nation the power of growing. This course is an introductory course for engineering professionals who would like to take up careers in manufacturing particularly at the process level and also for professionals who are already in manufacturing careers and would like to see the technological changes that the manufacturing processes have witnessed in the last about 5 decades. (from nptel.ac.in)
Course Currilcum
- Lecture 01 – Introduction Unlimited
- Lecture 02 – Structure of Matter (Bonding of Solids, Crystal Structures) Unlimited
- Lecture 03 – Brief Introduction of Non-conventional Machining Processes Unlimited
- Lecture 04 – Structure of Matter (Bonding of Solids, Crystal Structures) Unlimited
- Lecture 05 – Elastic and Plastic Deformation Unlimited
- Lecture 06 – Crystal Imperfection and Dislocation Unlimited
- Lecture 07 – Plastic Deformation Unlimited
- Lecture 08 – Material Properties, Stress Strain Diagram for Different Types of Materials Unlimited
- Lecture 09 – Friction and Wear, Solid Solutions Unlimited
- Lecture 10 – Equilibrium Phase Diagram Unlimited
- Lecture 11 – Iron-Carbon Equilibrium Phase Diagram Unlimited
- Lecture 12 – Control of Material Properties (Alloying and Heat Treatment) Unlimited
- Lecture 13 – Introduction to Casting Process Unlimited
- Lecture 14 – Pattern and Mold Design Unlimited
- Lecture 15 – Mold Making Procedures Unlimited
- Lecture 16 – Fundamentals of Melting and Furnaces and Pouring and Gating Design Unlimited
- Lecture 17 – Vertical and Bottom Gating Systems Unlimited
- Lecture 18 – Numerical Estimation to Find Mold Filling Time and Mold Design Unlimited
- Lecture 19 – Effect of Friction and Velocity Distribution in Time of Filing Unlimited
- Lecture 20 – Numerical Design of Gating Systems using Frictional and Bending Losses Unlimited
- Lecture 21 – Principle of Cooling and Solidification in Single and Multiphase Systems Unlimited
- Lecture 22 – Estimation of Rate of Solidification Unlimited
- Lecture 23 – Principles of Cooling and Solidification of Casting Unlimited
- Lecture 24 – Modeling of Solidification Rates of Thin Casting in a Metal Mold Unlimited
- Lecture 25 – Solidification with Predominant Interface Resistance Unlimited
- Lecture 26 – Numerical Estimation of Solidification of Metal Mold Unlimited
- Lecture 27 – Solidification of Casting with Predominant Resistance in Mold and Solidified Metal Unlimited
- Lecture 28 – Solidification Time for Permanent Mold Casting Unlimited
- Lecture 29 – Solidification with Constant Casting Surface Temperature Unlimited
- Lecture 30 – Riser Design and Placement Unlimited
- Lecture 31 – Riser Design and Placement (cont.) Unlimited
- Lecture 32 – Riser Design and Placement (cont.) Unlimited
- Lecture 33 – Introduction to Machining Processes Unlimited
- Lecture 34 – Review of Basic Machining Processes and the Mechanics of Chip Formation Unlimited
- Lecture 35 – Estimation of Cutting Ratio and Shear Angle Unlimited
- Lecture 36 – Merchant’s Force Analysis Unlimited
- Lecture 37 – Merchant Theory (Cutting Forces Analysis) Unlimited
- Lecture 38 – Merchant Theory (Forces Analysis) Unlimited
- Lecture 39 – Lee Shaffer’s Solution Unlimited
- Lecture 40 – Specific Energy Model for Cutting Unlimited
- Lecture 41 – Modeling of Heat Generation and Cutting Tool Temperature Unlimited
- Lecture 42 – Temperature in Cutting and Built Up Edge Formation Unlimited
- Lecture 43 – Metal Cutting Operation Unlimited
- Lecture 44 – Tool Life and Tool Wear Unlimited
- Lecture 45 – Economics of Machining Unlimited
- Lecture 46 – Joining Process Unlimited
- Lecture 47 – Principle of Solid State Welding Unlimited
- Lecture 48 – Numerical Design of Welding Power Sources in Arc Welding Unlimited
