Processing of Polymers and Polymer Composites. Instructor: Dr. Inderdeep Singh, Department of Mechanical and Industrial Engineering, IIT Roorkee.
1111 years
40
The main objective of this course is to impart an understanding of the manufacturing science and engineering of polymers and polymer composites which is usually not covered at the UG level. The course deals with the study of the basic nature of different polymers and polymer composites and the manufacturing processes associated thereof. The classification of engineering materials and processing techniques, the structure and mechanical properties of plastics, thermoplastics and thermosets, the various processing techniques of polymers such as Extrusion, Injection molding, Thermoforming, Compression molding and Transfer molding have been explained with the relevant and specific examples. The fundamental concept and classification of composite materials, properties of composites and the primary as well as secondary processing methods of polymeric matrix composites have been explained in detail. The various issues, challenges and opportunities in primary and secondary processing of polymers and polymer composites has also been explained. (from nptel.ac.in)
Course Currilcum
- Lecture 01 – Introduction Unlimited
- Lecture 02 – Engineering Materials and Processing Techniques Unlimited
- Lecture 03 – Thermoplastics and Thermosets Unlimited
- Lecture 04 – Processing of Polymers Unlimited
- Lecture 05 – Thermoforming Processes Unlimited
- Lecture 06 – Extrusion Unlimited
- Lecture 07 – Extrusion (cont.) Unlimited
- Lecture 08 – Compressing Molding Unlimited
- Lecture 09 – Injection Molding Unlimited
- Lecture 10 – Injection Molding (cont.) Unlimited
- Lecture 11 – Transfer Molding Unlimited
- Lecture 12 – Rotational Molding Unlimited
- Lecture 13 – Blow Molding Unlimited
- Lecture 14 – Composite Materials: Basic Concepts Unlimited
- Lecture 15 – Classification of Composite Materials Unlimited
- Lecture 16 – Processing of Polymer Composites Unlimited
- Lecture 17 – Hand Lay-Up Unlimited
- Lecture 18 – Spray Lay-Up Unlimited
- Lecture 19 – Compression Molding Unlimited
- Lecture 20 – Injection Molding Unlimited
- Lecture 21 – Reaction Injection Molding Unlimited
- Lecture 22 – Autoclave Molding Unlimited
- Lecture 23 – Resin Transfer Molding Unlimited
- Lecture 24 – Filament Winding Unlimited
- Lecture 25 – Pultrusion Process Unlimited
- Lecture 26 – Sheet Molding Unlimited
- Lecture 27 – Prepregging and Challenges in Primary Processing of Composites Unlimited
- Lecture 28 – Secondary Processing of Polymer Composites Unlimited
- Lecture 29 – Joining of Polymer Composites Unlimited
- Lecture 30 – Adhesive Joining Unlimited
- Lecture 31 – Mechanical Joining Unlimited
- Lecture 32 – Microwave Joining Unlimited
- Lecture 33 – Induction and Resistance Welding Unlimited
- Lecture 34 – Drilling of Polymer Matrix Composites Unlimited
- Lecture 35 – Drilling of Polymer Matrix Composites (cont.) Unlimited
- Lecture 36 – Methods to Prevent Drilling Induced Damage Unlimited
- Lecture 37 – Non-conventional Drilling Unlimited
- Lecture 38 – Process Simulation of Secondary Processing Unlimited
- Lecture 39 – Intelligent Drilling of Polymer Matrix Composites Unlimited
- Lecture 40 – Web Based Tools for Polymer Matrix Composites Unlimited
